L-36.com

Dimensions of Cape dory/typhoon

Updated 10/25/2012



Selected Measurements for Cape dory/typhoon

BOAT
I
J
P
E
ISP
JSP
PY
EY
Disp
LWL
DRAFT
Cape dory/typhoon 20.5 6.2 22 8.8 0 0 0 0 2000 13.5 2.6

Links to our Multi Vendor Used Sail Directory for Cape dory/typhoon

Other Data Base Entries for cape dory*

Click on boat nane to use
BOAT   I J P E ISP SPL PY PELWLDRAFTDISP
CAPE DORY 22   28 9 24 9.5 16.253 3200
Cape Dory 22 28 9 24 9.5 16.2533200
Cape Dory 22 28 9 24 9.5 28 9
Cape Dory 22 D 28 9 24 9.5 16.253
Cape Dory 22D 28 9 24 9.5 28 9
Cape Dory 25 28.5 8.9 23.7 11.7 1833850
CAPE DORY 25 28.5 8.9 23.7 11.7 183 4000
Cape Dory 25 28.5 8.9 23.7 11.7 28.5 8.9
Cape Dory 25 D 32 10.3 27.3 10.3 193.55120
CAPE DORY 25D 32 10.25 27.25 10.25 193.5 5120
Cape Dory 25D 32 10.3 27.3 10.3 32 10.3
CAPE DORY 26 32 10.25 27.25 10.25 19.253.58 5300
Cape Dory 26 32 10.3 27.3 10.3 19.253.65300
Cape Dory 26 32 10.3 27.3 10.3 32 10.3
CAPE DORY 27 34 11 29.75 11.25 204 7500
Cape Dory 27 34.5 11 30.5 11.5 2047500
Cape Dory 27 34.5 11 30.5 11.5 34.5 11
Cape Dory 270 38 11.6 32.3 11 20.7538380
CAPE DORY 270 38 11.6 32.3 11 20.757 8380
Cape Dory 270 38 11.6 32.3 11 38 11.6
CAPE DORY 28 36 11.5 31.5 12.5 22.214 9000
Cape Dory 28 36 11.5 31.5 12.5 22.2149000
Cape Dory 28 36 11.5 31.5 12.5 36 11.5
CAPE DORY 30 35 13.25 31.5 13 22.834.18 10000
Cape Dory 30 36 13.3 31.5 13 22.834.210000
Cape Dory 30 Cutter 36 13.3 31.5 13 36 13.3
CAPE DORY 30 KETCH 33.75 12 30 11 19 22.834.1710000
Cape Dory 30 Ketch 34.5 12 30 11 34.5 12 19 7
CAPE DORY 30 MK II 40.42 13.58 35.08 12.25 24.174.510617
Cape Dory 30-2 40.4 13.6 35.1 12.3 40.4 13.6
Cape Dory 300 40 12.3 33.6 12.3 26.53.911500
CAPE DORY 300 MS 40.75 12.83 35.25 12.25 26.53.9211500
Cape Dory 300 Ms 40.75 12.83 35.25 12.25 26.53.9211500
Cape Dory 300 MS 40.8 12.8 35.3 12.3 40.8 12.8
Cape Dory 30k 34.5 12 30 11 22.834.210000
CAPE DORY 31 41 13.5 35 13 23.254.75 11500
Cape Dory 31 41 13.5 35 13 23.254.811500
Cape Dory 31 41 13.5 35 13 41 13.5
Cape Dory 32 41 13.5 35 13 41 13.5
CAPE DORY 33 43 13 37 14 24.54.83 13300
Cape Dory 33 43 13 38 14 24.54.813300
Cape Dory 33 43 13 38 14 43 13
CAPE DORY 330 44.75 13.75 39 13 24.54.8313300
Cape Dory 330 44.75 13.75 39 13 24.54.8313330
Cape Dory 330 44.8 13.8 39 13 44.8 13.8
CAPE DORY 36 42 15.5 37 16 27516100
Cape Dory 36 Cut 42 15.5 37 16 27516100
Cape Dory 36 Cutter 42 15.5 37 16 42 15.5
Cape Dory 36 Ketch 42 13.8 36 12.5 42 13.8 23 8
CAPE DORY 36 KTH 42 13.75 36 12.5 23 27516100
Cape Dory 36 Kth 42 13.8 36 12.5 27516100
CAPE DORY 40 48.8 17.46 43.3 16.29 305.719500
Cape Dory 40 48.8 17.5 43.3 16.4 305.719500
Cape Dory 40 48.8 17.5 43.3 16.4 48.8 17.5
Cape Dory 45 52 18.25 46 14.25 33.56.2524000
CAPE DORY 45 52 18.25 46 14.25 29.5 33.56.25 24000
Cape Dory 45 52 18.3 46 14.3 52 18.3 29.5 9
Cape Dory 45 Cutter 52 18.3 46 18 52 18.3
Cape Dory Typhoon 20.5 6.2 22 8.8 20.5 6.2
Cape Dory Typhoon DS 21.9 6.9 20 8 21.9 6.9
Cape Dory Typhoon SR 26.5 8.7 27.8 9.7 26.5 8.7
Cape Dory/Typhoon 20.5 6.2 22 8.8 13.52.62000
Cape Dory/Typhoon Sr 26.5 8.7 27.8 9.7 16.53.13300
TYPHOON SR (CAPE DORY)   26 8.5 27.5 9.85 16.53.08 3300
Click Here for other boat types or to check dimensions from other data bases. We now offer three data bases.

Sail Area Calculations

BOAT
I
J
P
E
ISP
JSP
PY
EY
Disp
LWL
DRAFT
Cape dory/typhoon 20.5 6.2 22 8.8 20.5 6.2 0 0 2000 13.5 2.6

sailboat rig dimensions The following formulas are approximate
Sail areas depend on lots of factors, leach hollow, foot round, luff hollow etc. Also, remember that jib sail area in general is based on the forestay length, I. But all things considered, these numbers are close but should not be considered exact. They are rules of thumb, not measurements of a this specific boat.

Mainsail

Mainsail = (P x E) / 2 = 97 sq ft
Racing Mainsail (add 10%) = 107 sq ft

Genoa

155% Genoa = (( J x I ) / 2) x 1.65 = 105 sq ft
135% Genoa = (( J x I ) / 2) x 1.44 = 92 sq ft

Jib

  _______
LP of full fore triangle = ( I x J ) / √  I2 + J2 = 5.9
Jib size to fill fore triangle = 95%
100% Jib = ( I x J ) / 2 = 64 sq ft

A more accurate LP calculator is HERE

Spinnaker

Spinnaker Area = Max Luff x Max Girth x ( 70-85%) = 159 to 193 sq ft
"Square" Spinnaker Area = Max Luff x Max Girth) = 227 sq ft
AC Area = 189 sq ft
Maximum Luff (.95 * sqrt (JSP^2 + ISP^2) = 20.35 feet
Maximum Girth = 1.8 * JSP = 11.16 feet
Ref

DEFINITIONS

"P" is the luff length of the mainsail, measured along the aft face of the mast from the top of the boom to the highest point that the mainsail can be hoisted or black band.

"E" is the foot length of the mainsail, measured along the boom from the aft face of the mast to the outermost point on the boom to which the main can be pulled or to the black band.

"I" is measured along the front of mast from the genoa halyard to the main deck. The main deck is where the deck would be if there were no deckhouse.

"J" is the base of the foretriangle measured along the deck from the headstay pin to the front of the mast.

"JSP" is the length of the spinnaker pole or the distance from the forward end of the bowsprit (fully extended) to the front face of the mast.

"ISP" is measured from the highest spinnaker halyard to the deck.

"PY" and "EY" are, respectively the luff length and foot length of the mizzen of a yawl or ketch measured in the same way as for the mainsail.

"IY" is the measurement from the staysail halyard to the deck.

"JY" is the measurement from the staysail stay to the front face of the mast.

"LP" is the shortest distance between the clew and the luff of the genoa.


Data*

This data is supplied as a reference and all boat dimensions should be verified before using it in any critical application.
The information in these data bases is a starting point. There are errors as you can see as the different data bases do not always agree. In addition, some boats have been modified from stock and will not match the data in these databases. None of this data has been checked by L-36.com so please always check your boat before relying on this data.
Data is from a variety of sources.
db = SBD is used under the Creative Commons License sailboatdata.com (sailboatdata.com) / CC BY 3.0
db = PHRF is the PHRF Critical Dimensions database
db = WEB is the commonly available data found on many web sites
db = BIG is a combination of all of the above.


NOTICE: Some pages have affiliate links to Amazon. As an Amazon Associate, I earn from qualifying purchases. Please read website Cookie, Privacy, and Disclamers by clicking HERE. To contact me click HERE. For my YouTube page click HERE